TYPE "60H" THERMAL VACUUM FINGERLESS SINGLE FACER

STANDARD SPECIFICATIONS

1. Cartridge for upper and lower corrugating roll.

2. Motorized (air motor) cartridge moving device.

3. Hydraulic locking device for cartridge.

4. Deep hardened and chrome plated upper and lower heated corrugating rolls.

5. Extended nip belt equipment consisting of tension roll, belt roll and extended nip (KAPPA) belt.

6. Hydraulic loading of lower corrugating roll with analogue indication of loading pressure.

7. Automatic and hydraulic loading of extended nip (KAPPA) belt.

8. Vacuum device for upper heated corrugating roll including vacuum disk, casing, duct within machine, blower (115kW-125L) and silencer.

9. Upper corrugating roll scraper for clean out slot and prevention of medium wrapping.

10. Automatic and hydraulic nip belt alignment device.

11. Integral gearbox and right angle gearbox belt roll.

12. Independent motor driving device for preheat roll for medium.

13. Independent motor driving device for adhesive applicator roll.

14. Chrome plated and engraved adhesive applicator roll (20 mesh).

15. Chrome plated adhesive doctor roll.

16. Motorized adhesive doctor roll gap fine adjusting device.

17. Swing-back adhesive mechanism.

18. Automatic and hydraulic actuation of adhesive mechanism.

19. Automatic adhesive roll idling.

20. Automatically adjustable dams for adhesive pan (paper width input).

21. Adhesive pan with insulating material.

22. Water jacketed splash guard.

23. Integral 600mm diameter preheat roll for medium.

24. Steam shower for medium.

25. Rotating 500mm diameter preheat roll for liner.

26. Automatic adhesive applicator roll gap fine adjusting device.

27. Special heat resistant great lubrication for upper and lower corrugating roll, belt roll and tension roll bearings.

28. Process commander for automatic control

29. Automatic adhesive film thickness control.

30. Pre-piping including siphons, steam joints, flexible hoses and inlet manifold.

31. Pre-wiring.

Additional Features

1. (*) AC132kW main drive motor and control panel

2. (*) 22kW-200A Vacuum Blower

3. (*) Medium/liner web break detectors (two).

4. (*) Anti-wrap detector device for single faced web.

5. (*) Automatic steam shower shut-off for medium.

6. (*) Stainless steel adhesive pan.

7. (*) Relocatable operation panel (max.6m from operation side cover).